Make gaming pc steering wheel via Arduino

Today I am going to make a arduino powered pc gaming steering which can be used to control pc  games.

Requirements

HARDWARE

1.ARDUINO UNO
2.POTENTIOMETER
3.SOME JUMPER WIRES

SOFTWARE

1.ARDUINO

PROCEDURE

1.First off All Download the required files from the links given below:

     a. Flip installer- https://drive.google.com/file/d/1Sh5__x0kufrhudcp7VXlMUr6puvvO0N4/view?usp=sharing

     b. Unojoy folder- https://drive.google.com/drive/folders/1tM49zF18FFRpwjDcve53auza_06ifD-H?usp=sharing

2.Now Connect the Arduino Board to your Pc.

3.Install the Flip Software.

4.Update the driver:

  a.Right Click on this Pc Icon from Desktop then click on manage > Device Manager>Right click on Unknown Device>Update Driver> Browse my computer for Driver Software> Let me pick from a list...>Show all Devices and Click next> Have Disk>Browse>Select Driver According to your arduino board from Unojoy Folder.

5.Connect Reset(RST) And Ground(GND) Pin of Arduino Board together for a second Or You can manually Reset your Arduino Board.

6.Connect Potentiometer according to the picture:

7.Move to downloaded Unojoy Folder open it and Click on UnojoyArduinoSample and you will get the Arduino code there, Now upload the code.

8.After Uploading the code again move to the downloaded unojoy folder and Click on TurnintoAJoystick.

9.Make Your Steering Wheel and connect With Potentiometer.

10.Now Your Steering wheel Is ready you can also add pedals no other things to do only connect buttons to arduino board accordingly.

NOTE: If you want your Arduino Board back you can go to unojoy folder and click on TurnintoAnArduino.

THANKYOU         

             :--Aaryan